Skip to content

Area Calculator: Square Feet and Square Meters

Area calculator: square feet, square meters or six other units for 12 shapes, from rectangles and circles to a triangle with three known sides.

Units

cm

cm

Area · Rectangle

96 cm²A = l × w
In in²
14.88002976 in²
Perimeter
40 cm
Diagonal
14.4222051 cm

How to use the Area Calculator

  1. Choose the shape, such as Rectangle, Circle or Triangle (three sides).
  2. Pick the unit your measurements are in, for example meters or feet.
  3. Enter each measurement. The area updates as you type, with the formula used shown under it.
  4. Read extra figures such as the perimeter or diagonal below the result, and the area converted to the other unit system.

Formula

Rectangle A = l × w · Triangle A = ½ × b × h · Circle A = π × r²

Where:

A
Area, in square units of the length you entered (m², ft², cm², ...)
l, w
Length and width of a rectangle
b, h
Base of a triangle or parallelogram, and the height measured at a right angle to it
r
Radius of a circle or sector: half the diameter
π
Pi, about 3.14159265 (the calculator uses 40 digits)

Every shape's own formula is shown under the result when you select it. All measurements must use the same unit; the area comes out in that unit squared.

Worked example

You are laying a circular paver patio 14 ft across. Pavers cost $4.50 per square foot. How much area do you need to cover, and what will the pavers cost?

  1. The diameter is 14 ft, so the radius is r = 14 ÷ 2 = 7 ft.
  2. A = π × r² = π × 7² = π × 49 ≈ 153.94 ft².
  3. Cost = 153.94 × $4.50 ≈ $692.72 before any allowance for cutting waste.

The patio covers about 153.94 square feet (14.30 m²), so the pavers cost roughly $692.72, plus extra for cuts.

How to calculate square footage of a room or wall

For a rectangular floor or wall, area is length times width. Choose Rectangle, set the unit to feet and type the two measurements: the answer is in square feet, with the same area in square meters on the line below. Set the unit to meters and the pair swaps. Used this way the page is a square footage calculator for one shape at a time, or a square meter calculator in metric.

Three things to know before you measure:

  • The unit starts at inches or centimeters, depending on your region, so switch it before you type.
  • There is no combined feet-and-inches field. Turn inches into decimal feet by dividing by 12 (9 ft 6 in is 9.5 ft), or enter everything in inches and divide the result by 144 to get square feet.
  • Openings are not subtracted for you. Work out each door or window as its own rectangle and take it off the wall.

Area formulas for all 12 shapes

The formula in use is printed under the result.

ShapeFormulaYou enter
RectangleA = l × wlength, width
SquareA = s²side
TriangleA = ½ × b × hbase, perpendicular height
Triangle (three sides)A = √(s(s − a)(s − b)(s − c))sides a, b, c; s is half the perimeter
CircleA = π × r²radius (half the diameter)
EllipseA = π × a × bhalf the longest and half the shortest width
Trapezoid (trapezium)A = ½ × (a + b) × hthe two parallel sides, height between them
ParallelogramA = b × hbase, perpendicular height
RhombusA = ½ × p × qthe two diagonals
Circle sectorA = (θ ÷ 360) × π × r²radius, angle in degrees
Regular polygonA = n × s² ÷ (4 × tan(π ÷ n))number of sides (3 to 1,000), side length
Ring (annulus)A = π × (R² − r²)outer and inner radius

Extra figures appear where the inputs fix them: a rectangle's perimeter and diagonal, a circle's circumference, a sector's arc length.

Triangles: base and height or three sides

The base-and-height option needs the perpendicular height, not the length of a sloping edge. On a plot of land that height is often impossible to measure, which is where Triangle (three sides) helps: it applies Heron's formula to the three edge lengths alone.

Take a plot with sides of 25 m, 39 m and 56 m and no right-angled corner. Half the perimeter is s = (25 + 39 + 56) ÷ 2 = 60, so A = √(60 × 35 × 21 × 4) = √176,400 = 420 m², which is about 4,520.84 ft² or 0.104 acres.

Three lengths only close into a triangle when each is shorter than the other two combined; otherwise you get a message, not a misleading number.

L-shaped rooms, gable walls and irregular plots

Only one shape is calculated at a time, so a compound surface is split into simple pieces, each piece is calculated, and the results are added by hand.

A house end wall is a rectangle 8 m wide and 2.5 m high, topped by a triangular gable with the same 8 m base and a peak 1.8 m above the eaves. It has one window of 1.2 m².

  • Rectangle: 8 × 2.5 = 20 m².
  • Gable triangle: ½ × 8 × 1.8 = 7.2 m².
  • Whole wall: 20 + 7.2 = 27.2 m².
  • Minus the window: 27.2 − 1.2 = 26.0 m².

Paint that covers 10 m² per liter needs 2.6 liters for one coat and 5.2 liters for two.

An L-shaped room is two rectangles. A rounded bay is a rectangle plus a 180° sector. A four-sided plot with no parallel sides becomes two triangles once you measure one diagonal: run each through the three-sides option, using the diagonal as a side of both, and add the two areas.

Square feet to square meters, and from area to materials

An area conversion uses the length factor squared. One foot is exactly 0.3048 m, so 1 ft² is 0.09290304 m² and 1 m² is about 10.7639 ft², not 3.28. One square foot is 144 square inches. For acres, hectares or square yards use the area converter.

The figure here is the exact geometric area. Flooring, tile and turf lose some of it to cuts, so buyers usually add 5% to 10% for a simple room and up to 15% for diagonal layouts. The flooring calculator, tile calculator and paint calculator turn an area into boxes, tiles or cans to buy.

Assumptions

Every shape is treated as perfectly flat, with straight edges or exact curves. Sloped, bumpy or curved surfaces have a larger true area. Results are computed with 40 significant digits and displayed rounded to 10.

Frequently asked questions

How do I calculate the square footage of a wall?

Measure the width and the height in feet and multiply them, then subtract doors and windows. A wall 14 ft wide and 8 ft high is 112 ft²; taking off a 3 ft by 7 ft door (21 ft²) leaves 91 ft² to paint or panel. If you measured in inches, divide each length by 12 first, so 114 in becomes 9.5 ft.

How do I calculate the square meters of a room?

Measure the length and width in meters and multiply them. A room 4.2 m by 3.6 m is 15.12 m². For an L-shaped room, split it into two rectangles, find each area and add them together; the tool works on one shape at a time, so the adding is done by hand.

How do I find the area of a triangle?

Half the base times the height: A = ½ × b × h, where the height is measured at a right angle to the base. If you only know the three side lengths, use Heron's formula instead; choose Triangle (three sides) above. Sides of 7, 8 and 9 give about 26.83 square units.

How do I find the area of a circle?

Use A = π × r², where r is the radius. If you measured the diameter, halve it first: a circle 10 cm across has r = 5 cm and an area of about 78.54 cm². Using the diameter directly in π × r² gives an answer four times too large.

How do I convert square meters to square feet?

Multiply by 10.7639, because 1 m is 3.28084 ft and an area conversion squares the length factor. So 20 m² is about 215.28 ft². Going the other way, multiply square feet by 0.09290304. The result panel does this for you: an area entered in meters is also shown in ft², and one in feet in m².

How many square feet is a 12x12 room?

A room 12 ft by 12 ft is 144 square feet, which is about 13.38 m². That is the exact floor area with no allowance for waste. Installers commonly add 5% to 15% for cuts and breakage when ordering flooring or tile; adding 10% makes it 158.4 ft².

Last updated: