Surface Area Calculator: Lateral and Total Surface Area
Lateral surface area calculator for cylinders, cones, prisms and pyramids, with the total area, slant height and volume of 11 solids.
Surface area · Cylinder
- In in²
- 54.53815754 in²
- Lateral area (side)
- 251.3274123 cm²
- Base (each end)
- 50.26548246 cm²
- Volume
- 502.6548246 cm³
How to use the Surface Area Calculator
- Choose the solid, such as Cylinder, Cone or Rectangular prism (box).
- Pick the unit your measurements are in, for example centimeters or inches.
- Enter each dimension. The total surface area updates as you type, with the formula shown under it.
- Use the rows below the result for the lateral (side) area, base areas, slant height and volume.
Formula
Cylinder S = 2πr² + 2πrh · Cone S = πr² + πrℓ · Sphere S = 4πr²
Where:
- S
- Total surface area, in square units of the length you entered (cm², m², in², ft², ...)
- r
- Radius of the circular base or of the sphere: half the diameter
- h
- Height, measured straight up at a right angle to the base
- ℓ
- Slant height of a cone: √(r² + h²), the distance from the rim to the tip along the side
- π
- Pi, about 3.14159265 (the calculator uses 40 digits)
Each solid's own formula is shown under the result when you select it. Total surface area counts every face, including the top and bottom; the lateral area counts only the sides.
Worked example
You want to paint the outside of a closed cylindrical water tank with a radius of 0.6 m and a height of 1.5 m, including the top and bottom. The paint covers 10 m² per liter and you need two coats. A 1-liter can costs $18.
- Ends: 2 × π × r² = 2 × π × 0.6² ≈ 2.2619 m².
- Side: 2 × π × r × h = 2 × π × 0.6 × 1.5 ≈ 5.6549 m².
- Total: S ≈ 2.2619 + 5.6549 ≈ 7.9168 m² (about 85.22 ft²).
- Paint for two coats: 7.9168 × 2 ÷ 10 ≈ 1.58 liters, so buy two 1-liter cans: 2 × $18 = $36.
The tank's surface is about 7.92 m², so two coats need roughly 1.58 liters of paint: two cans, $36.
Total, lateral and curved surface area
The outside of a solid can be measured three ways, and the right one depends on the job:
- Total surface area (TSA) counts every face: sides, top and bottom. Paint for a closed tank uses the total.
- Lateral surface area counts the sides only and leaves out the bases. A label around a jar, or the four walls of a box without lid and floor, is lateral area.
- Curved surface area (CSA) is the name used in many Indian and British syllabi for the lateral area of a round solid such as a cylinder or cone.
The main result is always the total. The side area is on its own line below it, with the pieces it leaves out:
| Solid | Side figure shown | Left out of it |
|---|---|---|
| Cube, rectangular prism | Lateral area (4 sides) | top and bottom |
| Cylinder | Lateral area (side) | two circular ends |
| Cone | Lateral area (side) | the circular base |
| Square or rectangular pyramid | Lateral area (4 faces) | the base |
| Triangular prism | Lateral area (3 sides) | two triangular ends |
| Conical frustum | Lateral area (side) | both circular ends |
| Hemisphere | Curved area | the flat base |
| Capsule | Cylindrical side | the two rounded ends |
| Sphere | none | nothing: the whole surface is curved |
Lateral surface area of a cylinder and a cone
Unroll the side of a cylinder and it becomes a rectangle, one circumference long and one height tall, so L = 2πrh. That is the figure to use for the outside of a pipe that will be painted or insulated: enter the outer radius and the pipe's length as the height, then read the lateral line and ignore the ends. A pipe 6 cm across (r = 3 cm) and 400 cm long has about 7,539.82 cm² of outer wall, roughly 0.75 m².
A cone's side unrolls into a sector of a circle, with L = πrℓ, where ℓ is the slant height. A waffle cone with a 2.5 cm rim radius and a 12 cm height has a slant height of √(2.5² + 12²) ≈ 12.26 cm, so the waffle itself is π × 2.5 × 12.26 ≈ 96.27 cm². The total adds the 19.63 cm² circle at the top, which a real cone leaves open.
Rectangular and triangular prisms
Worked example. A gift box measures 12 in long, 8 in wide and 4 in tall.
- Top and bottom: 2 × 12 × 8 = 192 in².
- Front and back: 2 × 12 × 4 = 96 in².
- Two ends: 2 × 8 × 4 = 64 in².
- Total: 192 + 96 + 64 = 352 in², of which 160 in² is lateral.
Wrapping paper overlaps and folds at the corners, so add about 15%: 352 × 1.15 = 404.8 in², roughly a 20 in by 20 in sheet with a little spare.
The triangular prism here has equilateral ends, so one side length describes the triangle. With a 4 cm side and a 10 cm length, the three rectangles make 3 × 4 × 10 = 120 cm², each end is about 6.93 cm² and the total is about 133.86 cm². For any other triangle, multiply the triangle's perimeter by the prism length for the lateral area, and find the two ends with the area calculator.
Finding the slant height
Formulas for pointed solids use the slant height, measured along the sloping face, but a ruler gives you the vertical height. You enter the vertical height and the slant height is derived with the Pythagorean theorem and listed in the results:
- Cone: ℓ = √(r² + h²).
- Square pyramid: ℓ = √(h² + (a ÷ 2)²). A base of 6 and a height of 4 give ℓ = 5, a lateral area of 60 and a total of 96.
- Rectangular pyramid: two slant heights, one for each pair of faces.
- Conical frustum: ℓ = √((R − r)² + h²).
Pyramids are right pyramids, with the apex above the center of the base.
Surface area formulas for all 11 solids
| Solid | Total surface area |
|---|---|
| Cube | S = 6s² |
| Rectangular prism (box) | S = 2(lw + lh + wh) |
| Cylinder | S = 2πr² + 2πrh |
| Cone | S = πr² + πrℓ |
| Sphere | S = 4πr² |
| Hemisphere | S = 3πr² |
| Square pyramid | S = a² + 2aℓ |
| Rectangular pyramid | S = lw + l·ℓ₁ + w·ℓ₂ |
| Triangular prism | S = 2 × (√3 ÷ 4) × a² + 3aL |
| Capsule | S = 4πr² + 2πra |
| Conical frustum | S = π(R + r)ℓ + πR² + πr² |
Run backward, the sphere formula gives r = √(S ÷ 4π): a soccer ball with about 1,520.53 cm² of panels has a radius of 11 cm. Each result also lists the solid's volume; the volume calculator adds liters and gallons.
Assumptions
Every solid is a perfect geometric shape with smooth faces and no wall thickness; rims, seams and textured surfaces add area. Radii are entered, not diameters, so halve a measurement taken across. For an open top or open ends, subtract the base figures listed under the result. Results use 40 significant digits and are displayed rounded to 10.
Frequently asked questions
How do I find lateral surface area?
Add up the side faces and leave out the bases. For a prism or cylinder that is the perimeter of the base times the height; for a cone or square pyramid it is half the base perimeter times the slant height. A box 12 in × 8 in × 4 in has a lateral area of 2 × (12 + 8) × 4 = 160 in².
How do I find the lateral surface area of a cone?
Multiply π by the radius and the slant height: L = π × r × ℓ, with ℓ = √(r² + h²). A cone with r = 3 and h = 4 has a slant height of 5, so its lateral area is 15π, about 47.12. Adding the circular base, π × 3² ≈ 28.27, gives a total of about 75.40.
How do I find the lateral surface area of a cylinder?
Multiply the circumference of the base by the height: L = 2πrh. For a can with r = 3.3 cm and h = 11.5 cm that is about 238.45 cm², the size of its label. The two circular ends add 2πr² ≈ 68.42 cm², for a total of 306.87 cm². If one end is open, like a cup, drop one πr².
How do I find the slant height of a cone?
Use the Pythagorean theorem on the radius and the vertical height: ℓ = √(r² + h²). Height runs straight up from the center of the base to the tip; slant height runs along the sloping side from the rim to the tip. Here you enter the vertical height and the slant height is worked out. If you only know the slant height, find h = √(ℓ² − r²) first.
How do I calculate the surface area of a cube?
Square the edge and multiply by six, one for each face: S = 6 × s². A cube with 3 cm edges has 6 × 9 = 54 cm² of surface, and the four side faces alone make 36 cm². Working backward, the edge is √(S ÷ 6), so a cube with 150 cm² of surface has 5 cm edges.
What is the difference between total and lateral surface area?
Lateral surface area covers only the sides of a solid: the curved wall of a cylinder or the triangular faces of a pyramid. Total surface area adds the base or bases too. A label wrapped around a can uses the lateral area; painting the whole can uses the total. Textbooks in India and the UK often call them curved surface area (CSA) and total surface area (TSA).
Related calculators
- Volume CalculatorA volume calculator in liters, US gallons and cubic units for 12 solids, from boxes and cylinders to cones, spheres and tubes.
- Area CalculatorArea calculator: square feet, square meters or six other units for 12 shapes, from rectangles and circles to a triangle with three known sides.
- Perimeter CalculatorPerimeter calculator: circle circumference from the radius, plus the distance around rectangles, triangles, semicircles and eight other shapes.
- Area ConverterUse this area converter: square feet to square meters, acres to hectares or any pair of ten floor, land and map units, with exact factors.
- Length ConverterUse this length converter: feet to meters, cm to inches, miles to km or any pair of nine units, with exact factors and every unit listed.
Last updated: