Length Converter: Feet to Meters, cm to Inches and More
Use this length converter: feet to meters, cm to inches, miles to km or any pair of nine units, with exact factors and every unit listed.
Inches to centimeters
- Millimeter (mm)
- 254
- Centimeter (cm)
- 25.4
- Meter (m)
- 0.254
- Kilometer (km)
- 0.000254
- Inch (in)
- 10
- Foot (ft)
- 0.833333333333
- Yard (yd)
- 0.277777777778
- Mile (mi)
- 0.000157828282828
- Nautical mile (nmi)
- 0.000137149028078
How to use the Length Converter
- Type the length you want to convert, for example 10.
- Pick the unit it is in under From, such as inches.
- Pick the unit you want under To, such as centimeters. The answer updates as you type.
- Use the swap button to reverse the direction, and read the list below the answer to see the same length in every unit.
Formula
L₂ = L₁ × f₁ ÷ f₂
Where:
- L₁
- The length you enter, in the From unit
- f₁
- Meters in one From unit (1 in = 0.0254 m, 1 ft = 0.3048 m, 1 mi = 1,609.344 m)
- f₂
- Meters in one To unit (1 cm = 0.01 m, 1 km = 1,000 m, 1 nmi = 1,852 m)
- L₂
- The converted length, in the To unit
Every factor is exact by definition: the inch, foot, yard and mile were fixed in meters by the 1959 international yard and pound agreement, and the nautical mile is exactly 1,852 m. Results are shown to 12 significant digits.
Worked example
A bookshelf is 6 feet tall. How tall is it in meters and in centimeters?
- From unit: foot, so f₁ = 0.3048 m. To unit: meter, so f₂ = 1 m.
- L₂ = 6 × 0.3048 ÷ 1 = 1.8288 m.
- For centimeters, f₂ = 0.01 m: L₂ = 6 × 0.3048 ÷ 0.01 = 182.88 cm.
6 feet is exactly 1.8288 meters, or 182.88 centimeters.
Length is the most common thing people convert, because the world still runs on two systems at once. Road signs in the United States and the United Kingdom show miles and a phone screen is sold by the inch, yet a running race is measured in kilometers and almost every engineering drawing is in millimeters. The tool handles nine units: millimeter, centimeter, meter and kilometer (metric, where each step is a power of ten), inch, foot, yard and mile (imperial and US customary, with ratios of 12, 3 and 1,760), and the nautical mile used at sea and in the air.
Feet to meters and meters to feet
One foot is exactly 0.3048 m, so multiply feet by 0.3048 to get meters. Going back, divide meters by 0.3048, or multiply by about 3.28084. The chart below gives the values you meet most often, from a single step to a 100-foot building.
| Feet (ft) | Meters (m) |
|---|---|
| 1 | 0.3048 |
| 2 | 0.6096 |
| 3 | 0.9144 |
| 5 | 1.524 |
| 6 | 1.8288 |
| 8 | 2.4384 |
| 10 | 3.048 |
| 20 | 6.096 |
| 50 | 15.24 |
| 100 | 30.48 |
Inches to centimeters chart
Each inch adds exactly 2.54 cm, so this chart works like a ruler with both scales printed side by side. Read it in reverse for the metric to inch direction: 5 cm sits just under 2 inches.
| Inches (in) | Centimeters (cm) |
|---|---|
| 1 | 2.54 |
| 2 | 5.08 |
| 3 | 7.62 |
| 4 | 10.16 |
| 5 | 12.7 |
| 6 | 15.24 |
| 7 | 17.78 |
| 8 | 20.32 |
| 9 | 22.86 |
| 10 | 25.4 |
| 11 | 27.94 |
| 12 | 30.48 |
Common length conversions
| Value | Equals |
|---|---|
| 1 inch | 2.54 centimeters |
| 1 foot | 30.48 centimeters |
| 1 foot | 0.3048 meters |
| 1 yard | 0.9144 meters |
| 1 mile | 1.609344 kilometers |
| 1 nautical mile | 1.852 kilometers |
| 1 nautical mile | 1.150779448 miles |
| 1 meter | 3.280839895 feet |
| 1 meter | 39.37007874 inches |
| 1 centimeter | 0.3937007874 inches |
| 1 millimeter | 0.03937007874 inches |
| 1 kilometer | 0.6213711922 miles |
| 1 mile | 5,280 feet |
| 1 foot | 12 inches |
| 1 yard | 3 feet |
| 1 kilometer | 1,000 meters |
Converting a height in feet and inches
The converter takes one unit at a time, so a mixed height such as 5 ft 11 in needs a quick first step. Turn the feet into inches and add the rest: (5 × 12) + 11 = 71 inches. Enter 71 inches and convert to centimeters to get 180.34 cm. Typing 5.11 feet gives a different and wrong length, because 0.11 of a foot is about 1.3 inches, not 11.
For the reverse, convert centimeters to inches and split off the whole feet. A height of 170 cm is 66.929 inches; 60 of those inches make 5 feet, leaving about 6.93 inches, so 170 cm is roughly 5 ft 7 in when rounded to the nearest inch.
Why the conversions are exact
Before 1959, an American inch and a British inch differed by a few parts per million, because each country defined its yard against its own physical standard. The international yard and pound agreement settled this by defining the yard as exactly 0.9144 meters. A foot is a third of a yard (0.3048 m), an inch is a twelfth of a foot (2.54 cm), and a mile of 1,760 yards is 1,609.344 m. The nautical mile was later fixed at exactly 1,852 m.
Because the factors are exact, the converter works in 40-digit decimal arithmetic and only rounds when it shows the answer. Results that terminate, such as 10 inches to 25.4 centimeters, appear in full. Those that do not, such as 1 meter to 3.28083989501 feet, are shown to 12 significant digits. The meter is spelled metre in the UK, Canada, Australia and India; it is the same unit.
A worked example: the marathon distance
A marathon is officially 42.195 km. Runners call it "26.2 miles", but how close is that?
- Kilometers to meters: 42.195 × 1,000 = 42,195 m. Divide by the meters in a mile: 42,195 ÷ 1,609.344 ≈ 26.2188 miles.
- The other way with the rounded figure: 26.2 × 1,609.344 = 42,164.8128 m, about 42.165 km.
- The gap is 42,195 − 42,164.81 ≈ 30 meters. Anyone pacing a race to exactly 26.2 miles would stop about 30 m short of the finish line.
Converting both ways like this shows how much a rounded label hides.
Common mistakes
- Mixing up a mile and a nautical mile. A ship's 100 nautical miles is about 115 statute miles. Sea charts and flight plans almost always use nautical miles.
- Rounding too early. If you round 1 inch to 2.5 cm and multiply by 100, you are 4 cm out. Convert the full value and round the final answer once.
- Measuring a screen across. A 55-inch television is 139.7 cm corner to corner, not across its width.
- Copying old US survey figures. Land records in the United States written before 2023 may use the US survey foot (1200/3937 m), about 2 parts per million longer. This tool uses the international foot only.
Assumptions
All conversions use the exact international definitions above. Negative lengths are not accepted, and values up to one quadrillion (10¹⁵) are supported; extremely large or small results are shown in scientific notation, such as 1.609344 × 10²¹. Your unit system preference only changes which units are listed first; every unit is always available. Light-years, astronomical units and on-screen measuring are not included.
Frequently asked questions
How many cm in an inch?
Exactly 2.54. Since 1959 the inch has been defined as 25.4 millimeters, so the figure is not rounded. To convert inches to centimeters multiply by 2.54; to convert centimeters to inches divide by 2.54 (or multiply by about 0.3937). A 30 cm ruler is therefore about 11.81 inches long.
How many feet in a meter?
One meter is about 3.28084 feet, or 3 feet 3.37 inches. The exact value is 1 ÷ 0.3048 = 3.280839895..., a decimal that never ends, so the converter shows it to 12 significant digits. Going the other way is exact: multiply a length in feet by 0.3048, so 6 feet is 1.8288 meters.
How do I convert a height such as 5 ft 9 in to centimeters?
Turn it into inches first: 5 × 12 + 9 = 69 inches. Then multiply by 2.54: 69 × 2.54 = 175.26 cm. You can also enter 69 inches in the converter directly. The BMI calculator on this site accepts feet and inches as separate fields.
How many feet in a mile?
One mile is 5,280 feet, 1,760 yards or 63,360 inches, and exactly 1,609.344 meters. One kilometer is about 0.62137 miles, so a 5 km run is about 3.107 miles and a 10 km run about 6.214 miles. A half marathon of 21.0975 km is about 13.1 miles.
How many inches in a yard?
A yard is 36 inches, or 3 feet of 12 inches each. Since 1959 the yard has been defined as exactly 0.9144 meters, so it is 91.44 centimeters, a little shorter than a meter. Fabric, sports fields and golf distances are still often measured in yards.
What is the difference between a mile and a nautical mile?
A statute mile, the everyday mile used on roads in the US and UK, is 5,280 feet or exactly 1,609.344 meters. A nautical mile is exactly 1,852 meters, about 1.15078 statute miles. It was based on one minute of latitude, which makes it convenient for charts, so ships and aircraft use it, and a knot is one nautical mile per hour.
Related calculators
- Area ConverterUse this area converter: square feet to square meters, acres to hectares or any pair of ten floor, land and map units, with exact factors.
- Weight ConverterTry this weight converter: stone to kg, kg to lbs, ounces to grams and three kinds of ton, with exact factors and every unit at once.
- Temperature ConverterUse this temperature converter: Celsius to Fahrenheit, Fahrenheit to Celsius or either to Kelvin, with the formula shown for each direction.
- BMI CalculatorUse this BMI calculator (kg and cm, or pounds and feet) to see your body mass index, its WHO category and the healthy weight range for your height.
- Fraction CalculatorA fraction calculator with steps: add, subtract, multiply or divide two fractions or mixed numbers and follow every line of the working.
Last updated: