Tile Calculator with Spacing and Boxes
A tile calculator with spacing for a floor or wall: enter the area, tile size and grout joint to get the tiles and boxes to buy.
Tiles needed
- Area to tile
- 12 m²
- Tiles without the extra
- 34
- Boxes (4 tiles each)
- 10
- Coverage per box
- 1.44 m²
- Total area purchased
- 14.4 m²
How to use the Tile Calculator
- Measure the length and width of the floor or wall you want to tile and enter them.
- Enter the tile size and the grout joint width you plan to use.
- Set the extra for cuts and breakage: about 10% for a straight layout, 15% for diagonal or herringbone.
- Enter how many tiles come in a box, and optionally the price per box, to see boxes and cost.
Formula
Tiles = ⌈ (L × W) ÷ ((a + j) × (b + j)) × (1 + w ÷ 100) ⌉ · Boxes = ⌈ Tiles ÷ n ⌉
Where:
- L, W
- Length and width of the area to tile (m or ft)
- a, b
- Length and width of one tile (cm or in, converted to the same unit as L and W)
- j
- Grout joint width (mm or in, converted to the same unit)
- w
- Extra for cuts and breakage, in percent
- n
- Tiles in one box
- ⌈ ⌉
- Round up to the next whole tile or box
Each tile is counted with one grout joint along two sides, which is how the tile and joint repeat across a floor. The result assumes a rectangular area; split an L-shaped room into rectangles and add the results.
Worked example
A bathroom floor is 8 ft × 5 ft. You chose 12 × 12 in tiles with 1/8 in grout joints, sold 10 to a box at $25 a box, and want 10% extra.
- Area: 8 × 5 = 40 ft².
- Tile plus joint: 12.125 × 12.125 = 147.015625 in², which is 147.015625 ÷ 144 ≈ 1.02094 ft².
- Tiles without extra: 40 ÷ 1.02094 ≈ 39.18.
- With 10% extra: 39.18 × 1.10 ≈ 43.10, rounded up to 44 tiles.
- Boxes: 44 ÷ 10 = 4.4, rounded up to 5 boxes. Cost: 5 × $25 = $125, about $3.13 per ft².
Buy 44 tiles, which is 5 boxes of 10, for about $125.
How tile spacing changes the count
A tile on the floor takes up more space than its own face. Each one also claims a strip of grout along one long edge and one short edge, and that tile-plus-joint rectangle is what repeats across the room. The count therefore divides the area by (tile length + joint) × (tile width + joint), not by the bare tile size.
For large tiles the difference is small: with 60 × 60 cm tiles, a 3 mm joint changes the count by about 1%. With small formats it is significant: 10 × 10 cm mosaics laid with 5 mm joints need about 9% fewer tiles than the same mosaics butted tight. Choose the joint before you count. Typical widths, which your tile maker's instructions override:
| Tile type | Usual joint |
|---|---|
| Rectified porcelain (ground, square edges) | 2 to 3 mm (1/16 to 1/8 in) |
| Glazed wall tiles | about 1.5 to 2 mm (1/16 in) |
| Standard floor tiles | about 3 mm (1/8 in) |
| Handmade, rustic or pressed tiles | 5 mm (3/16 in) or wider |
The joint width also decides how much grout you need, but grout and adhesive quantities are not estimated here. Use the coverage chart on the grout bag, which lists the tile size, joint width and joint depth.
Tiles per square meter and per square foot
The spacing effect is easiest to see per unit of area. These figures are for one square meter or square foot, before any extra:
| Tile size | Joint | Tiles per m² |
|---|---|---|
| 30 × 30 cm | none | 11.1 |
| 30 × 30 cm | 3 mm | 10.9 |
| 60 × 60 cm | none | 2.78 |
| 60 × 60 cm | 3 mm | 2.75 |
In imperial units, 12 × 12 in tiles with 1/8 in joints come to about 0.98 per ft², and 12 × 24 in tiles about 0.49 per ft².
Extra for cuts and breakage
The extra covers tiles cut at walls, door frames and pipes, tiles that crack while cutting, and the occasional faulty piece. How much you need depends mostly on the pattern:
- Straight grid or brick bond: about 10%. Most cuts happen along the edges of the room.
- Diagonal (laid at 45°): about 15%. Every edge tile is cut into a triangle, and the offcuts are rarely reusable.
- Herringbone and chevron: 15% to 20%. Each row ends with an angled cut on both sides.
- Large-format tiles (60 × 120 cm, 24 × 48 in and up): a little more, because one broken tile is a large share of a box.
Small rooms with many corners, such as a powder room or a shower with a niche, use proportionally more tiles in cuts, so lean to the top of each range there.
Buying by the box
Stores sell tiles by the full box, so the result rounds up to whole boxes and shows the area they cover.
Worked example: a herringbone kitchen floor. A kitchen floor measures 3.6 m × 2.4 m. The owner picked 30 × 60 cm porcelain tiles, 8 to a box at $30, laid in herringbone with 2 mm joints and 15% extra.
- Area: 3.6 × 2.4 = 8.64 m².
- Tile plus joint: 0.302 m × 0.602 m = 0.181804 m².
- Tiles before waste: 8.64 ÷ 0.181804 ≈ 47.52.
- With 15% extra: 47.52 × 1.15 ≈ 54.65, rounded up to 55 tiles.
- Boxes: 55 ÷ 8 = 6.875, rounded up to 7 boxes, which cover 7 × 8 × 0.18 m² = 10.08 m².
- Cost: 7 × $30 = $210, or about $24.31 per square meter of floor.
Tile boxes carry a shade or batch code, and sometimes a caliber (size) code. Tiles from different lots can differ in color, so buy everything at once, check the codes match and keep a few spares for later repairs. Also check the actual work size on the box: a "12 × 24" tile may really measure 11.8 × 23.6 in.
Assumptions
Each calculation covers one rectangle with tiles of uniform size and joints of uniform width. Square and rectangular tiles only: hexagons and other shapes nest differently. For several walls or an L-shaped room, run each rectangle and add the results; window and door openings are subtracted by hand. There is no layout preview, and trim or bullnose edge pieces, usually counted by length, are not included. Results are estimates for planning; your tiler may suggest a different allowance for a specific room.
Frequently asked questions
How many tiles do I need?
Multiply the length and width of the area to get its size, divide by the area of one tile plus its grout joint, then add 10% to 15% for cuts and breakage and round up. A 4 m × 3 m floor (12 m²) with 60 × 60 cm tiles and 3 mm joints needs about 33 tiles before waste and 37 with 10% extra.
How many tiles are in a square meter or a square foot?
Divide 1 m² (or 1 ft²) by the area of one tile plus its joint. With 3 mm joints, 30 × 30 cm tiles work out at about 10.9 per m² and 60 × 60 cm tiles at about 2.75 per m². In imperial units, 12 × 12 in tiles with 1/8 in joints are about 0.98 per ft², and 12 × 24 in tiles about 0.49 per ft².
How many tiles do I need for a 12x12 room?
A 12 ft × 12 ft room is 144 ft². With 12 × 12 in tiles and 1/8 in grout joints, each tile plus joint covers about 1.021 ft², so the floor takes 141.05 tiles. Add 10% for cuts and breakage and round up: 156 tiles. Larger tiles or a diagonal layout change the count, so enter your own sizes.
How many tiles are in a box of 600x600 tiles?
It depends on the maker and the tile thickness. Standard 60 × 60 cm porcelain is often packed 4 to a box (1.44 m²), while thicker or premium tiles may come 3 (1.08 m²) or 2 to a box. Read the tiles per box from the label or product page and enter it, so the result rounds up to whole boxes.
How much extra tile should I buy?
Around 10% for a straight grid in a simple rectangular room, 15% for diagonal layouts, herringbone or rooms with many corners, and up to 20% for large-format tiles or very irregular spaces. Keep a few spare tiles after the job for future repairs, because a later batch may not match.
How much tile do I need for my shower?
Treat each wall and the floor as separate rectangles. Measure each one, run it through the calculator and add the tile counts. Subtract large openings such as a window or the door side of the enclosure, but keep the full waste allowance, because niches, valves and edges around openings all need extra cuts.
Related calculators
- Flooring CalculatorFlooring calculator: cost of the whole boxes you buy, plus the waste for your layout, leftover area and baseboard length for one room.
- Concrete CalculatorA concrete calculator in cubic meters and cubic yards for a slab, footing, wall or round post, with premix bags, site-mix materials and cost.
- Paint CalculatorPaint calculator: walls and ceiling of one room, minus doors and windows, in liters or US gallons for any number of coats, rounded up to whole cans.
- Brick CalculatorA brick calculator with mortar for any straight wall: bricks to buy after doors and windows, plus the mortar, cement bags and sand it takes.
- Area CalculatorArea calculator: square feet, square meters or six other units for 12 shapes, from rectangles and circles to a triangle with three known sides.
- Area ConverterUse this area converter: square feet to square meters, acres to hectares or any pair of ten floor, land and map units, with exact factors.
Last updated: