Flooring Calculator: Cost, Boxes and Waste
Flooring calculator: cost of the whole boxes you buy, plus the waste for your layout, leftover area and baseboard length for one room.
Flooring to buy
- Floor area
- 20 m²
- With 10% waste
- 22 m²
- Area you buy (whole boxes)
- 22 m²
- Left over
- 0 m²
- Baseboard / skirting
- 17.1 m
How to use the Flooring Calculator
- Enter the length and width of the room, measured wall to wall at the widest points.
- Pick the layout pattern. It fills in the usual waste allowance, which you can change.
- Enter the coverage printed on one box, and optionally the price per square foot or square meter.
- Read the boxes to buy, the leftover area, the baseboard or skirting length and the estimated cost.
Formula
A = L × W · Boxes = ⌈A × (1 + w ÷ 100) ÷ C⌉ · Baseboard = 2 × (L + W) − D
Where:
- A
- Floor area, in m² or ft²
- L, W
- Room length and width, in m or ft
- w
- Waste allowance in percent: about 10 straight, 15 diagonal, 20 herringbone
- C
- Coverage of one box, in m² or ft², from the label
- ⌈ ⌉
- Round up to the next whole box
- D
- Total width of door openings, where no baseboard is fitted
Cost is the area of whole boxes bought × the price per unit of area. Waste allowances are typical trade figures; follow the manufacturer's guidance for your product.
Worked example
A living room is 14 ft × 11.5 ft. You plan a diagonal laminate lay with 23.4 ft² per box at $2.89 per ft², and one 3 ft doorway.
- Floor area: 14 × 11.5 = 161 ft².
- Add 15% for a diagonal lay: 161 × 1.15 = 185.15 ft².
- Boxes: 185.15 ÷ 23.4 = 7.91, rounded up to 8 boxes, which cover 8 × 23.4 = 187.2 ft².
- Cost: 187.2 × $2.89 = $541.01.
- Baseboard: 2 × (14 + 11.5) − 3 = 48 ft.
Buy 8 boxes (187.2 ft²) for about $541.01, and 48 ft of baseboard.
How much flooring to buy
Floor coverings are sold by the box or pack, not by the exact area of your room. The tool turns a room's length and width into whole boxes after allowing for the planks you will cut and discard. It suits any product sold by coverage area: laminate, luxury vinyl plank (LVP) and vinyl tile, engineered wood, solid hardwood, bamboo, cork and carpet tiles. Broadloom carpet off a roll adds seams and roll-width offcuts, so ask the retailer to plan that cut.
Measure at floor level from wall to wall, at the widest points, and round up to the next inch or centimeter. Walls are rarely parallel, so take two or three measurements along each side and use the largest. Include the floor under freestanding furniture, but not under fitted kitchen cabinets. Do not trust a floor plan: plans often measure to the center of walls or leave out alcoves.
For an L-shaped room, split the floor into rectangles, run each one, and add the areas with waste before rounding up to whole boxes. Rounding each part separately can make you buy an extra box. A closet or hallway in the same flooring belongs with the room it opens onto, since planks continue through the doorway.
Flooring cost for whole boxes
You pay for whole boxes, so the cost is the area of the boxes bought times your price per square foot or square meter, in the currency selected at the top of the page. That is the material cost only. Many online cost figures also include installation, so add the extras yourself:
- Labor: the installer's rate per unit of area times the floor area, or their fixed quote.
- Underlayment: foam or felt underlay is sold by area too; buy roughly the floor area plus 5% for overlaps. Over a concrete slab a vapor barrier is usually required.
- Transitions and trims: thresholds, reducers and stair nosings are sold by length or by piece.
- Delivery and tax.
Waste allowance by layout
Every row ends with a cut plank, and patterns that meet the walls at an angle produce more offcuts. The layout options fill in common trade allowances, which you can overwrite:
| Layout | Waste | Why |
|---|---|---|
| Straight | 10% | The offcut from one row often starts the next |
| Diagonal | 15% | Edge pieces are cut on an angle at both ends |
| Herringbone or chevron | 20% | Short blocks meet at angles; every perimeter piece is trimmed |
Raise the figure for bay windows, many door frames or a fireplace hearth, or if you are new to cutting planks.
Worked example: vinyl plank in a bedroom. A bedroom measures 4.5 m × 3.6 m and gets luxury vinyl plank laid straight, in packs of 2.23 m² at 21.50 per square meter. The doorway is 0.8 m wide.
- Floor area: 4.5 × 3.6 = 16.2 m².
- With 10% waste: 16.2 × 1.1 = 17.82 m².
- Packs: 17.82 ÷ 2.23 = 7.99, so 8 packs, covering 17.84 m².
- Leftover beyond the waste allowance: 0.02 m², practically nothing.
- Cost: 17.84 × 21.50 = 383.56 in your currency.
- Skirting: 2 × (4.5 + 3.6) − 0.8 = 15.4 m.
Because the result lands just under a whole pack, one badly cut plank would leave you short. It is worth buying a ninth pack and returning it unopened if the store allows it.
Baseboard and skirting length
Baseboard (skirting board in the UK, Ireland and Australia) runs around the room's perimeter, less the total width of the doorways you enter. It also hides the expansion gap of about 1/4 to 1/2 in (roughly 6 to 12 mm) that floating floors need at every wall. Buy a little extra length for miter cuts at the corners.
Before you lay a plank
- Let the boxes acclimatize. Many makers ask for unopened boxes to rest flat in the room for 24 to 72 hours; some rigid-core vinyl needs no wait.
- Buy from one production lot. Check every box shows the same batch number, and mix planks from several boxes as you go.
- Keep a spare box. A sealed box from the same lot makes a damaged plank easy to replace years later.
Assumptions
Each run covers one rectangular room; odd shapes, several rooms and stairs need separate runs or hand calculation. Waste figures are typical trade allowances, not product specifications. The cost covers whole boxes of material only, with no labor or underlayment. Confirm quantities with your supplier or installer before you order.
Frequently asked questions
How much flooring do I need?
Multiply the room's length by its width to get the floor area, add a waste allowance (about 10% for a straight lay), then divide by the coverage on one box and round up. A 16 ft × 12 ft room is 192 ft²; with 10% waste that is 211.2 ft², or 11 boxes of 20 ft².
How much flooring do I need for a 12x12 room?
A 12 ft × 12 ft room is 144 ft². With 10% waste for a straight lay you need 158.4 ft². In boxes of 20 ft² that is 7.92, so buy 8 boxes, which cover 160 ft² and leave 1.6 ft² beyond the waste allowance. A diagonal or herringbone lay needs more, so pick the layout before you count.
How much extra flooring should I buy for waste?
About 10% for planks laid straight, 15% for a diagonal lay and 20% for herringbone or chevron, because angled patterns create more offcuts. Rooms with many corners, alcoves or a fireplace may need a little more. Some installers keep 5% to 7% for simple rectangular rooms with click laminate.
How many square feet are in a box of laminate flooring?
It varies by product. Laminate boxes commonly hold about 15 to 25 ft² (roughly 1.5 to 2.5 m²), and luxury vinyl plank boxes about 18 to 30 ft². Always use the coverage printed on the box you are buying, since plank length and thickness change it.
Does the flooring cost include installation?
No. The cost is materials only: the area of the whole boxes you buy times the price you enter. To include labor, multiply the floor area by the installer's rate and add it. For example, a 161 ft² room at a quoted $2.50 per ft² adds $402.50. Underlayment, trims, delivery and taxes are also extra.
Is baseboard the same as skirting board?
Yes. Baseboard is the usual US term and skirting board the UK and Australian term for the trim along the bottom of a wall. You need roughly the room's perimeter, minus doorways. Buy a little extra for miter cuts at the corners.
Related calculators
- Tile CalculatorA tile calculator with spacing for a floor or wall: enter the area, tile size and grout joint to get the tiles and boxes to buy.
- Paint CalculatorPaint calculator: walls and ceiling of one room, minus doors and windows, in liters or US gallons for any number of coats, rounded up to whole cans.
- Area CalculatorArea calculator: square feet, square meters or six other units for 12 shapes, from rectangles and circles to a triangle with three known sides.
- Area ConverterUse this area converter: square feet to square meters, acres to hectares or any pair of ten floor, land and map units, with exact factors.
- Perimeter CalculatorPerimeter calculator: circle circumference from the radius, plus the distance around rectangles, triangles, semicircles and eight other shapes.
- Concrete CalculatorA concrete calculator in cubic meters and cubic yards for a slab, footing, wall or round post, with premix bags, site-mix materials and cost.
Last updated: