Kinetic Energy Calculator: Velocity, Mass and Energy
Kinetic energy calculator: velocity, mass or energy from the other two with KE = ½mv², plus gravitational potential energy with PE = mgh.
Energy (E)
- In ft·lbf
- 147,512.43 ft·lbf
- In kJ
- 200 kJ
- In MJ
- 0.2 MJ
- Momentum (p = m × v)
- 20,000 kg·m/s
How to use the Kinetic Energy Calculator
- Pick the formula: Kinetic energy for a moving object, or Potential energy for an object raised to a height.
- Under Solve for, choose the value you want to find.
- Enter the other values with their units, such as kilograms and meters per second.
- Pick the unit for the answer; the result also shows momentum (kinetic) or the speed reached after falling that height (potential).
Formula
KE = ½ × m × v² · PE = m × g × h
Where:
- KE, PE (E)
- Energy in joules (J); 1 J = 1 kg·m²/s²
- m
- Mass of the object, in kilograms (or g, lb, oz)
- v
- Speed of the object, in m/s (or km/h, mph, ft/s)
- g
- Gravitational acceleration: 9.80665 m/s² (standard gravity) on Earth
- h
- Height above the chosen reference level, in meters (or ft)
All values are converted to SI units before solving. Potential energy is measured from a reference level you choose (usually the ground or a tabletop) and assumes g is constant over the height, which holds near Earth's surface. Speeds well below the speed of light are assumed (classical mechanics).
Worked example
A 0.145 kg baseball is thrown at 40 m/s (about 89.5 mph). How much kinetic energy does it carry?
- Square the speed: v² = 40² = 1,600 m²/s².
- Multiply by the mass: 0.145 × 1,600 = 232.
- Halve it: KE = ½ × 232 = 116 J.
- Momentum for comparison: p = m × v = 0.145 × 40 = 5.8 kg·m/s.
The baseball carries 116 J of kinetic energy.
Finding velocity from kinetic energy
Rearranging KE = ½ m v² for speed gives v = √(2·KE ÷ m). Choose Velocity under Solve for, enter the energy and the mass, and pick the speed unit you want.
Example: a 60 kg sprinter carries 3,000 J of kinetic energy. Then v = √(2 × 3,000 ÷ 60) = √100 = 10 m/s, or 36 km/h. The mass rearranges the same way, m = 2·KE ÷ v², and the result panel also shows momentum (p = m × v) for every kinetic energy answer.
Kinetic energy from mass and velocity
Kinetic energy is the energy of motion: a rolling car, a swinging hammer, a falling raindrop. It is measured in joules (J); one joule is roughly the energy needed to lift a 100 g apple by one meter. Nutrition labels use kilocalories (1 kcal = 4,184 J), electricity bills use kilowatt-hours (1 kWh = 3,600,000 J), and US engineering texts often use foot-pounds. The tool converts between all of them exactly, and mass and speed can be entered in kilograms, grams, pounds, m/s, km/h, mph, ft/s or knots.
Why doubling speed quadruples energy
Take a 1,500 kg car at 100 km/h.
- Convert the speed: 100 ÷ 3.6 = 27.78 m/s.
- KE = ½ × 1,500 × 27.78² ≈ 578,704 J, about 579 kJ.
- At 50 km/h (13.89 m/s): KE = ½ × 1,500 × 13.89² ≈ 144,676 J.
Halving the speed cuts the energy to a quarter. The brakes have to turn all of it into heat, which is why stopping distance grows with the square of speed and why a small speed reduction near schools makes such a difference.
Gravitational potential energy (mgh)
Potential energy is stored energy that depends on position: a book on a shelf, water behind a dam. Switch the formula to Potential energy to solve PE = m g h for the energy, the mass, the height or the gravitational acceleration itself. Mass and energy are shared between the two formulas, so you can switch without retyping.
Setting the two energies equal gives a shortcut. An object dropped from rest loses m g h and gains ½ m v², so the mass cancels and the speed at the bottom is v = √(2 g h). The result shows this impact speed for every potential energy answer. It ignores air resistance, so it is an upper limit for real falling objects.
A small hydro scheme shows the scale: one cubic meter of water (1,000 kg) held 50 m above a turbine stores 1,000 × 9.80665 × 50 = 490,332.5 J, about 0.136 kWh. Turbines convert roughly 80 to 90% of that into electricity, which is why hydropower needs very large flows.
| Location | g (m/s²) | Energy to lift 70 kg by 1 m |
|---|---|---|
| Earth (standard) | 9.80665 | 686.5 J |
| Mars | 3.71 | 259.7 J |
| Moon | 1.62 | 113.4 J |
Arrows, bullets and grains
Archers and shooters usually quote mass in grains and speed in feet per second. Feet per second is built in, but grains are not. Convert first: one grain is exactly 64.79891 mg, so a 400-grain arrow is 25.92 g. Enter 25.92 g and 280 ft/s and the arrow carries about 94.4 J, or 69.6 ft·lbf with foot-pounds as the energy unit.
Common mistakes
- Forgetting the ½, which doubles the answer.
- Squaring the wrong thing. ½ × (m v)² gives a very different number from ½ × m × v².
- Using weight in newtons as mass. A 700 N person has a mass of about 71 kg; put kilograms into the formulas.
- Mixing units by hand. Grams or km/h left unconverted cause errors by a factor of 1,000 or about 13. Entering the original units here avoids that.
- Applying m g h over huge heights. For satellites and rockets, gravity weakens with distance and the full formula −G M m ÷ r is needed.
Assumptions
The tool uses classical (Newtonian) mechanics, accurate for speeds far below the speed of light. Potential energy is measured from a reference level you choose, with positive heights, and assumes uniform gravity over the height, true to better than 0.1% below about 3 km near Earth's surface. Impact speeds ignore air resistance, and real systems lose energy to friction and sound. Relativistic, rotational, spring (elastic) energy and impact force are not covered, and the result shows the rearranged formula rather than step-by-step working.
Frequently asked questions
How do I find velocity from kinetic energy?
Rearrange the formula: v = √(2 × KE ÷ m). For 200,000 J and 1,000 kg, v = √400 = 20 m/s, or 72 km/h. Use joules and kilograms to get meters per second. Choose Velocity under Solve for and the calculator does the rearrangement for you, in m/s, km/h, mph, ft/s or knots.
How do I find mass from kinetic energy?
Rearrange to m = 2 × KE ÷ v². A ball carrying 116 J at 40 m/s has a mass of 2 × 116 ÷ 1,600 = 0.145 kg, the mass of a baseball. Square the speed before dividing, and convert it to m/s first so that the answer comes out in kilograms.
How do I calculate kinetic energy in joules?
Multiply half the mass by the speed squared: KE = ½ × m × v². Use kilograms and meters per second to get joules, since 1 J = 1 kg·m²/s². A 70 kg cyclist at 8 m/s has ½ × 70 × 64 = 2,240 J. Convert km/h to m/s by dividing by 3.6 first.
What is kinetic energy and potential energy, and what are their formulas?
Kinetic energy is the energy of motion, KE = ½ × m × v². Gravitational potential energy is stored energy due to height, PE = m × g × h. A ball dropped from a height turns potential energy into kinetic energy as it falls, so ignoring air resistance it lands at v = √(2gh), whatever its mass.
How do I calculate potential energy in physics?
Multiply mass, gravitational acceleration and height: PE = m × g × h. Lifting a 2 kg book onto a 1.5 m shelf stores about 2 × 9.81 × 1.5 ≈ 29.4 J. Use 9.80665 m/s² (or the rounded 9.81) for Earth, about 1.62 m/s² for the Moon and 3.71 m/s² for Mars.
Why does doubling the speed quadruple the kinetic energy?
Speed is squared in the formula. Going from 50 km/h to 100 km/h multiplies the kinetic energy by 2² = 4, which is why braking distances grow so quickly with speed and why crashes at higher speed are far more severe.
Related calculators
- Force CalculatorThis force calculator in newtons solves Newton's second law, F = m × a, for force, mass or acceleration, with each value in its own unit.
- Speed CalculatorA speed calculator with time and distance inputs: find speed, distance or travel time from the other two, plus pace per km and per mile.
- Density CalculatorDensity calculator: formula ρ = m ÷ V solved for density, mass or volume, with unit conversion and specific gravity.
- Ohm's Law CalculatorThis Ohm's law calculator with watts takes any two of volts, amps, ohms and watts and works out the other two, showing the formula for each.
- Scientific CalculatorA free online scientific calculator in degree mode by default, with a DEG/RAD switch, trig, logs, powers, roots, memory and history.
- Weight ConverterTry this weight converter: stone to kg, kg to lbs, ounces to grams and three kinds of ton, with exact factors and every unit at once.
Last updated: